Ford Escape: Driver Controls - Ford Escape Owner's ManualFord Escape: Driver Controls

Replacing fog lamp bulbs (if equipped)
1. Make sure the fog lamp switch is in the off position. 2. From underneath the vehicle, carefully disconnect the electrical connector from the bulb. 3. Remove the bulb from the lamp assembly by ...

Multi-function lever
Windshield wiper: Rotate the end of the control away from you to increase the speed of the wipers; rotate towards you to decrease the speed of the wipers. Windshield washer: Press the end of t ...

See also:

Important safety notes
WARNING On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced vehicle control. Your vehicle's ABS will not preve ...

Selecting a magnetic zone
Magnetic zones. The earth is divided into 15 magnetic zones. The correct zone must be selected for the compass to work correctly. 1. Put the ignition in mode II. 2. Using a pen or similar obje ...

Engine (ignition) switch (vehicles without smart key system)
■ Starting the engine 1 Check that the parking brake is set. 2 Check that the shift lever is set in P. 3 Sit in the driver’s seat and firmly depress the brake pedal. 4 Turn the engine swit ...