Jeep Liberty: Steering Wheel Audio Controls - Understanding Your Instrument Panel - Jeep Liberty Owner's ManualJeep Liberty: Steering Wheel Audio Controls

The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches.

Remote Sound System Controls (Back View Of Steering Wheel)
Remote Sound System Controls (Back View Of Steering Wheel)

The right-hand control is a rocker-type switch with a pushbutton in the center and controls the volume and mode of the sound system. Pressing the top of the rocker switch will increase the volume, and pressing the bottom of the rocker switch will decrease the volume.

Pressing the center button will make the radio switch between the various modes available (AM/FM/SAT/ CD/HDD/AUX/VES, etc.).

The left-hand control is a rocker-type switch with a pushbutton in the center. The function of the left-hand control is different depending on which mode you are in.

The following describes the left-hand control operation in each mode.

Operating Instructions - Uconnect™ Phone (If Equipped)
Refer to “Uconnect™ Phone” in “Understanding The Features Of Your Vehicle”. ...

Radio Operation
Pressing the top of the switch will “Seek” up for the next listenable station and pressing the bottom of the switch will “Seek” down for the next listenable station. The button located in ...

See also:

Trailer Towing
Before pulling a trailer, there are three important considerations that have to do with weight: ○ The weight of the trailer ○ The weight of the trailer tongue ○ The total weight ...

Readiness for Inspection/Maintenance (I/M) testing
Some state/provincial and local governments may have Inspection/Maintenance (I/M) programs to inspect the emission control equipment on your vehicle. Failure to pass this inspection could prevent y ...

If the light is blinking
If the light is blinking while driving, an engine misfire condition has been detected which may damage the emission control system. To prevent serious damage to the emission control system, y ...