Jeep Liberty: Models With Express Window Feature
Press and release the mirror select button marked L (left) or R (right) and then press one of the four arrow buttons to move the mirror in the direction the arrow is pointing.
The selection will time out after 30 seconds of inactivity to guard against accidentally moving a mirror position following an adjustment.
NOTE: For vehicles equipped with Driver Memory Seat, you can use your Remote Keyless Entry (RKE) transmitter or the memory switch on the instrument panel to return the power mirrors to pre-programmed positions. Refer to “Driver Memory Seat” in “Understanding The Features Of Your Vehicle” for further information.
Power Mirrors
The power mirror switch is located on the driver’s door trim panel. Power Mirror Switch 1 — Mirror Direction Control 2 — Left and Right Mirror Select ...Models Without Express Window Feature
Press the mirror select button marked L (left) or R (right) and then press one of the four arrow buttons to move the mirror in the direction the arrow is pointing. ...See also:
Brake pad inspection
On vehicles equipped with a jack*, the condition
of the brake pads can be checked by raising
the vehicle (see page 306 for information
about using the jack and removing a wheel)
and performing ...
Adjusting the settings
■ Adjusting the temperature setting
Turn the temperature control dial clockwise (warm) or counterclockwise
(cool).
If is not pressed, the system
will blow ambient temperature air or
heate ...
Under the hood and vehicle
The maintenance items listed here should be
checked periodically (for example, each time you
check the engine oil or refuel).
Battery*: Check the fluid level in each cell.
It should be between t ...