Ford Escape: Optional settings – these settings can be changed - MyKey - Locks and Security - Ford Escape Owner's ManualFord Escape: Optional settings – these settings can be changed

• Vehicle speed is limited to 80 mph (130 km/h). Visual warnings are displayed followed by a chime when the vehicle speed has reached 80 mph (130 km/h).
• Visual warnings are displayed followed by a chime when a preselected vehicle speed of 45, 55 or 65 mph (75, 90, or 105 km/h) is exceeded.
• The maximum volume of the audio system is limited to 45%. MYKEY VOLUME LIMITED will be displayed in the radio or (if equipped) navigation screen when attempting to exceed the limited volume.
• The AdvanceTrac system cannot be turned off. When this optional setting is on, the MyKey user will not be able to deactivate the system. Note: It may be beneficial to deactivate the AdvanceTrac system if the vehicle is stuck in snow, mud, or sand.

    MyKey restricted features
    Standard settings – these settings cannot be changed • The audio system will be muted whenever Belt-Minder is activated until the safety belts are buckled. Refer to the Seating and Safety Restr ...

    Create a MyKey
    To program MyKey on one of the keys programmed to the vehicle, insert the key that you want to make a MyKey into the ignition. Turn the ignition on. Use the message center buttons to do the followin ...

    See also:

    Rear seats
    ■ Second seats Vehicles with third seat 1 Seat position adjustment levers 2 Seatback angle adjustment levers When a person sits in the rear center position, adjust both seat cushions t ...

    Connecting a device to the A/V-AUX socket
    The A/V-AUX socket is located under the center armrest in the tunnel console 1. Connect the device's video cable to the yellow connector. 2. Connect the left audio cable to the white connector ...

    Adding engine oil
    WARNING If engine oil comes into contact with hot engine parts, it may ignite and you could burn yourself. Do not spill any engine oil on hot engine parts. Environmental note When adding oil ...