Volvo XC60: Connecting a device to the A/V-AUX socket
The A/V-AUX socket is located under the center armrest in the tunnel console
1. Connect the device's video cable to the yellow connector.
2. Connect the left audio cable to the white connector and the right audio cable to the red one.
3. If the device is designed to use 12-volt current, connect its power cable to the 12-volt socket (see page 200 for the location of this socket).
Always follow the device's instructions when connecting it to the RSE system.
A/V-AUX socket, 12-volt socket
This A/V-AUX socket is used to connect external devices to the RSE system. When connecting an external device, always follow the instructions provided with the device. Devices connected throug ...Audio/video playback through the A/VAUX socket
1. Switch on one of the rear screens by pressing its On/Off button. 2. Use the remote control's button to select a screen (L: left rear screen, F: front screen, or R: right rear screen). Poi ...See also:
Using The Panic Alarm
NOTE: The PANIC and Security Alarms are quite
different. Please take a moment to activate the PANIC
and the Security modes to hear the differences in the
horn. In case one should go off in the f ...
Towing eyes
The towing eyes at the front
and rear
of the vehicle are designed for
on-road recovery only. If they are used
for any other purpose, it may result in
vehicle damage and serious injury.
The t ...
Position of the steering wheel for driving
The steering wheel is moved to the last selected position when:
the driver's door is closed.
you insert the SmartKey into the ignition lock.
or
you press the Start/Stop button once on ve ...