Ford Escape: Fog lamp control (if equipped)
The headlamp control also operates
the fog lamps. The fog lamps can be
turned on when the headlamp
control is in the positions
and the high beams are
not turned on.
Pull the headlamp control towards you to turn the fog lamps on. The fog lamp indicator light will illuminate.
Autolamp control (if equipped)
The autolamp system provides light
sensitive automatic on-off control of
the exterior lights normally
controlled by the headlamp control.
The autolamp system is factory
programmed to keep the l ...
High beams
• Push the lever toward the
instrument panel to activate.
• Pull the lever toward you to
deactivate.
...
See also:
Steps for Determining Correct Load Limit
1. Locate the statement "the combined
weight of occupants and cargo should
never exceed XXX pounds" on your vehicle's
placard.
2. Determine the combined weight of the
driver and pas ...
Fluid Level Check
The fluid level should be to the bottom edge of the fill
hole (1) when the vehicle is in a level position.
1 — Fill Plug
2 — Drain Plug ...
Rear lamp bulbs
1. Remove the two fixings.
2. Direction indicator.
3. Reversing lamp
Turn the relevant bulb holder counter
clockwise and pull to remove from the lamp
unit. Grip the holder then press the bulb i ...