Ford Escape: Flash-to-pass
Pull toward you slightly to activate and release to deactivate.
High beams
• Push the lever toward the
instrument panel to activate.
• Pull the lever toward you to
deactivate.
...
Daytime running lamps (DRL) (if equipped)
Turns the low beam headlamps on with a reduced output.
To activate:
• the ignition must be in the on position.
• the headlamp control must be in the off, parking lamps or autolamp
position ...
See also:
Tilt steering column
This feature allows you to tilt the steering column
upward or downward. The tilt lever is located on the
steering column, below the turn signal lever.
Push the lever down to unlock the steering c ...
From inside the vehicle (central locking button)
Central locking button
The lock buttons on the door panel can be used
to lock or unlock all doors and the tailgate at
the same time. Press to lock and
to
unlock.
Unlocking
The vehicle ca ...
Extra high beam
1. Remove the headlight housing from the
vehicle (see page 322).
2. Remove the cover over the bulbs (see
page 323).
3. Disconnect the wiring connector from the
bulb holder.
4. Remove the bu ...