Subaru Forester: Air inlet selection button
Air inlet selection button
ON position (Recirculation): Interior air is recirculated inside the vehicle. Push the air inlet selection button to the ON position.
The indicator light will illuminate.
Place the air inlet selection button to the ON position for fast cooling with the air conditioner or when driving on a dusty road.
OFF position (Outside air): Outside air is drawn into the passenger compartment.
Push the air inlet selection button again to the OFF position. The indicator light will turn off.
Place the air inlet selection button to the OFF position when the interior has cooled to a comfortable temperature and the road is no longer dusty.
Continued operation with the air inlet selection button in the ON position may fog up the windows.
Switch to the OFF position as soon as the outside dusty condition clears.
Air conditioner button
Air conditioner button The air conditioner operates only when the engine is running. Push the air conditioner button while the fan is in operation to turn on the air conditioner. The indic ...Heater operation
NOTE - Models with air conditioner system: When the “” or “” position is selected, the air conditioner compressor automatically operates regardless of the position of the air condi ...See also:
Special operating conditions
If you operate your vehicle primarily in any of the following conditions,
you need to perform additional maintenance as indicated. If you
occasionally operate your vehicle under any of these conditi ...
Tether anchorage points (Australia only)
WARNING:
Child restraint anchorages
are designed to withstand only those
loads imposed by correctly fitted child
restraints. Under no circumstances
are they to be used for adult seat
belts, ha ...
Setting a warning distance
This setting determines the distance at which
the visual and audible warnings are triggered.
Select Long, Normal or Short by pressing MY
CAR on the center console control panel and
going to Set ...