Mercedes-Benz GLK-Class: Working on the vehicle
WARNING
When working on the vehicle, engage the parking brake and shift the automatic transmission into park position P. Otherwise the vehicle could roll away which could result in an accident and/or serious personal injury.
Kickdown
Use kickdown for maximum acceleration. Vehicles for USA: fully depress the accelerator pedal. The transmission shifts to a lower gear depending on the engine speed. Vehicles for Canada: depre ...Trailer towing
When towing a trailer and driving downhill, shift to the lower gear if the automatic transmission constantly shifts between two gears. Engaging a lower gear and reducing the speed reduces the ...See also:
Getting the spare tire and tools
1. Open the lift gate.
2. Remove the cargo cover (if so equipped).
(See “Cargo cover” in the “2. Instruments
and controls” section.)
3. Lift up the luggage floor board 1 (foldable
or ...
Front-side view
Front-side view
Guiding lines:
Guiding lines that indicate the width and the
front end of the vehicle are displayed on the
monitor.
The front-of-vehicle line 1 shows the front part
of the v ...
Parksense Sensors
The four ParkSense sensors, located in the rear fascia/
bumper, monitor the area behind the vehicle that is
within the sensors’ field of view. The sensors can detect
obstacles from approximate ...