GMC Terrain: Turning the System On and Off - Ultrasonic Parking Assist - Object Detection Systems - Driving and Operating - GMC Terrain Owner's ManualGMC Terrain: Turning the System On and Off

The URPA system can be turned on and off using the infotainment system controls. See Vehicle Personalization on page 5‑33 for more information.

When the system is off, PARK ASSIST OFF displays on the Driver Information Center (DIC). The message disappears after a short period of time.

URPA defaults to the on setting each time the vehicle is started.

    How the System Works
    URPA comes on automatically when the shift lever is moved into R (Reverse). A single tone sounds to indicate the system is working. URPA operates only at speeds less than 8 km/h (5 mph). An obstac ...

    When the System Does Not Seem to Work Properly
    The following messages may be displayed on the DIC: SERVICE PARKING ASSIST: If this message occurs, take the vehicle to your dealer to repair the system. PARK ASSIST OFF: If the URPA system does n ...

    See also:

    Scanning
    SCAN automatically searches through the list of satellite channels. The search will only be carried out in the selected category, see page 215 for more detailed information on the scan functio ...

    Parking aids
    The rear parking aids sensors are automatically disabled when a trailer with an approved electrical connector is connected. Note: Trailers fitted with LED lights will not disable the rear parking ...

    Cleaning the interior
    Only use cleaning agents and car care products recommended by Volvo. Clean regularly and follow the instructions included with the car care product. ...