Toyota RAV4: Trip information
Without Display Audio system
Push the “DISP” button to display trip information. Display items can be switched by pressing the “DISP” button.
With Display Audio system
Push the “DISP” button to display trip information. Display items can be switched by pressing the “DISP” button.
■ Outside temperature
Indicates the outside temperature.
The temperature range that can be displayed is from -40°F (-40°C) to 122°F (50°C). If the outside temperature falls below 37°F (3°C) while driving, the temperature display will flash a few times to inform the driver of the need for caution due to ice on the road resulting from the low temperature.
■ Instantaneous fuel consumption
Displays the instantaneous fuel consumption.
■ Average fuel consumption
Displays the average fuel consumption since the function was reset.
• To reset the calculations, return the mode to
“AVG” and push and hold the “DISP” button until
the display shows “0”.
• Use the displayed average fuel consumption as a
reference.
■ Display
In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change.
● When stopped, or driving at low speeds (less than 12 mph [20
km/h])
● When the outside temperature has changed suddenly (at the
entrance/exit of a garage, tunnel, etc.)
Trip information display
The trip information display presents the driver with a variety of driving- related data, including the current outside temperature. Trip information Displays outside temperature and fuel consum ...See also:
Emission Compliance Label (for U.S.A.)
Emission Compliance
Label (for U.S.A.)
The EPA emission compliance label is located under the hood. ...
Number of seats
The specifications shown on the Tire and Loading Information placard in the
illustration are examples. The number of seats is vehicle-specific and can differ
from the details shown. The number ...
Checking and replacing fuses
Replacing a Fusible Link
A fusible link will melt if the electrical circuits from
the battery are ever overloaded, thus preventing
damage to the entire wiring harness. (This
could be caused ...