Jeep Liberty: Towing Requirements – Tires - Towing Requirements - Trailer Towing - Starting And Operating - Jeep Liberty Owner's ManualJeep Liberty: Towing Requirements – Tires

− Do not attempt to tow a trailer while using a compact spare tire.

− Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle. Refer to “Tires – General Information” in “Starting and Operating” for information on tire pressures and for proper tire inflation procedures.

− Check the trailer tires for proper tire inflation pressures before trailer usage.

− Check for signs of tire wear or visible tire damage before towing a trailer. Refer to “Tires – General Information” in “Starting and Operating” for information on tread wear indicators and for the proper inspection procedure.

− When replacing tires, refer to “Tires – General Information” in “Starting and Operating” for information on replacement tires and for the proper tire replacement procedures. Replacing tires with a higher load carrying capacity will not increase the vehicle’s GVWR and GAWR limits.

    Towing Requirements
    To promote proper break-in of your new vehicle drivetrain components, the following guidelines are recommended: CAUTION! • Do not tow a trailer at all during the first 500 miles (805 km) the ...

    Towing Requirements – Trailer Brakes
    − Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer. This could cause inadequate braking and possible personal injury. − An ele ...

    See also:

    Installing the cover
    1. Press the end piece on one side of the cargo area cover into the retaining bracket in the side panel of the cargo area 1. 2. Do the same on the opposite side 2. 3. Press both sides of the cov ...

    Brake temperature
    In extreme circumstances, the HDC system may cause brake temperatures to exceed their pre-set limits. An HDC warning will be displayed in the message centre. HDC will then fade out and become temp ...

    Create a MyKey
    To program MyKey on one of the keys programmed to the vehicle, insert the key that you want to make a MyKey into the ignition. Turn the ignition on. Use the message center buttons to do the followin ...