Mercedes-Benz GLK-Class: Removing the ball coupling - Trailer towing - Driving and parking - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Removing the ball coupling

  • Observe the manufacturer's installation instructions.
  • Press the protective cap into the ball coupling recess.
  • Make sure that the protective cap is firmly in place.
    Checking the vehicle and trailer weight
    To check that the weights of the towing vehicle and the trailer comply with the maximum permissible values, have the vehicle/trailer combination (including the driver, passengers, and cargo w ...

    Storing the ball coupling
    WARNING Do not carry the ball coupling in the vehicle interior if it is not secured. Otherwise, you and others could be injured by the ball coupling being thrown around if you: brake shar ...

    See also:

    Preparation for using the Handsfree system
    Before using the Hands-free system, it is necessary to register a cell phone in the system. Perform the following procedure to register a cell phone. 1. Press the OFF hook switch . 2. Select в ...

    IR-reflecting windshield
    Section of the windshield where the IR-coating is not applied An optional factory-installed infrared (IR) coating can be applied to the windshield to help protect the cabin from the sun's hea ...

    Checking the tire pressure
    1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hiss ...