Hyundai Tucson: Heating controls
For normal heating operation, set the air intake
control to the fresh air (
) position and
the
air flow control to the floor (
)
position.
For faster heating, the air intake control should
be set in the recirculate (
) position.
If the windows fog up, set the air flow control to
the defrost (
) position. (The A/C will be
on
automatically and "Fresh" mode will be activated.)
For maximum heat, rotate the temperature
control to "Warm".
Heating and ventilation
There are three controls and two switches for
the heating and cooling system. They are:
1. Air flow control.
2. Fan speed control.
3. Temperature control.
4. Air intake control switch.
5 ...
Bi-level heating
Your Hyundai is equipped with bi-level heating
controls. To use this feature:
o Set the air intake control to the fresh air
() position.
o Set the air flow control at the bi-level ()
posit ...
See also:
Folding second seats
Folding down the second seats will enlarge the luggage compartment.
■ Before folding the second seats
1 Stow the second center seat belt.
Make sure the outside seat belt
passes through the ...
Tire Pressure Monitoring System (TPMS)
This vehicle is equipped with the Tire Pressure
Monitoring System (TPMS). It monitors tire
pressure of all tires except the spare. When
the low tire pressure warning light is lit and the
CHECK ...
Warning symbols on the battery
NOTE
A used battery should be disposed of in an
environmentally responsible manner. Consult
your Volvo retailer or take the battery to
a recycling station. ...
