Mercedes-Benz GLK-Class: Setting climate control to automatic - Operating the climate control system - Climate control - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Setting climate control to automatic

WARNING WARNING

If you switch off the cooling function, the vehicle will not be cooled when weather conditions are warm. The windows can fog up more quickly. Window fogging may impair visibility and endanger you and others.

In automatic mode, the set temperature is maintained automatically at a constant level. The system automatically regulates the temperature of the dispensed air, the airflow and the air distribution.

Automatic mode will achieve optimal operation if cooling with air dehumidification is also activated. If desired, cooling with air dehumidification can be deactivated.

  • Turn the SmartKey to position 2 in the ignition lock.
  • Set the desired temperature.
  • To activate: press the The indicator lamp in the button button. The indicator lamp in the lights up. Automatic air distribution and airflow are activated. button lights up. Automatic air distribution and airflow are activated.
  • To switch off: press the button. or button. or
  • Press the button. or The indicator lamp in the button button.
    The indicator lamp in the goes out. Automatic air distribution and airflow are deactivated. button goes out. Automatic air distribution and airflow are deactivated.
    Problems with the cooling with air dehumidification function
    When you press the button, the indicator lamp in the button flashes three times or remains off. You can no longer switch on the cooling with air dehumidification function. X Consult a qualified ...

    Setting the temperature
    Different temperatures can be set for the driver's and front-passenger sides. Turn the SmartKey to position 2 in the ignition lock. To increase/reduce: turn controls 1 and 8 clockwise or cou ...

    See also:

    Voice Training
    For users experiencing difficulty with the system recognizing their voice commands or numbers the Uconnect™ Voice “Voice Training” feature may be used. 1. Press the Voice Command button, ...

    Hill start assist warning light
    Refer to “Hill start assist warning light (MT models)”. ...

    Programming A Non-Rolling Code
    For programming Garage Door Openers manufactured before 1995. 1. Turn the ignition switch to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink ...