GMC Terrain: Overview - Introduction - Infotainment System - GMC Terrain Owner's ManualGMC Terrain: Overview

For vehicles equipped with the MyLink® or IntelliLink® infotainment system, see the separate MyLink/ IntelliLink Features and Functions Guide for more information. Keeping your eyes on the road and your mind on the drive is important for safe driving. The infotainment system has built-in features intended to help with this by disabling some features when driving. A grayed-out function is not available when the vehicle is moving.

All functions are available when the vehicle is parked. Do the following before driving:

○ Become familiar with the infotainment system operation, buttons on the faceplate, and touch-sensitive screen buttons.

○ Set up the audio by presetting favorite stations, setting the tone, and adjusting the speakers.

○ Set up phone numbers in advance so they can be called easily by pressing a single button or a single voice command for vehicles equipped with phone capability.

WARNING

Taking your eyes off the road too long or too often while using the navigation system could cause a crash and you or others could be injured or killed. Focus your attention on driving and limit glances at the moving map on the navigation screen. Use voice guidance whenever possible.

Theft-Deterrent Feature
The theft-deterrent feature works by learning a portion of the Vehicle Identification Number (VIN) to the infotainment system. The infotainment system does not operate if it is stolen or moved to ...

Infotainment System Overview
The infotainment system is controlled by using the buttons on the faceplate and the touch screen. See “Infotainment Control Buttons” in this section for more information. ...

See also:

Cleaning the RSE Seatback Console
Use only a clean cloth dampened with clean water to clean the RSE seatback console surface. ...

Ignition mode II
- With the remote key fully pressed into the ignition slot, press START/STOP ENGINE for approximately 2 seconds. ...

Turn Signals
Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. Turn Signal Control NOTE: ...