Mercedes-Benz GLK-Class: Replacing the rear window wiper blade - Replacing the wiper blades - Windshield wipers - Lights and windshield wipers - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Replacing the rear window wiper blade

Removing the wiper blade

  • Remove the SmartKey from the ignition lock.
  • Fold wiper arm 1 away from the rear window until it engages.
  • Position wiper blade 2 at a right angle to wiper arm 1.
  • Hold wiper arm 1 and press wiper blade 2 in the direction of the arrow until it releases.
  • Remove wiper blade 2.

Installing the wiper blade

  • Place new wiper blade 2 onto wiper arm 1.
  • Hold wiper arm 1 and press wiper blade 2 in the opposite direction to the arrow until it engages.
  • Make sure that wiper blade 2 is seated correctly.
  • Position wiper blade 2 parallel to wiper arm 1.
  • Fold wiper arm 1 back onto the rear window.
    Replacing the windshield wiper blades
    Removing the wiper blades Before changing the wiper blades, always set the wiper arms to a vertical position using the combination switch. There is otherwise a risk of damaging the hood. Moving ...

    Problems with the windshield wipers
    The windshield wipers are obstructed Leaves or snow, for example, may be obstructing the windshield wiper movement. The wiper motor has been deactivated. For safety reasons, you should remove t ...

    See also:

    If A Deployment Occurs
    The Advanced Front Air Bags are designed to deflate immediately after deployment. NOTE: Front and/or side air bags will not deploy in all collisions. This does not mean something is wrong with ...

    Vehicle Load Limits
    It is very important to know how much weight the vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo and all nonfactory&-instal ...

    Recreational towing (behind motorhome, etc.)
    Two-Wheel Drive Models All Four Wheels On The Ground Recreational towing is allowed ONLY if the driveshaft is removed. Towing with the rear wheels on the ground while the driveshaft is connected ...