GMC Terrain: Back–Up Lamp
Removal of the lamp assembly is not required to replace the back-up lamp bulb.
To replace one of these lamps:
1. Open the liftgate. See Liftgate on page 2‑9.
2. Remove the interior trim access panel.
3. Turn the bulb socket counterclockwise and pull it out.
4. Pull the bulb straight out of the socket.
5. Install the new bulb.
6. Push the bulb socket in and turn it clockwise.
7. Reinstall the interior trim access panel.
Auxiliary Taillamp
To replace one of these lamps:
1. Open the liftgate. See Liftgate on page 2‑9.
2. Remove the interior trim access panel.
A. Attachment Nuts
B. Retaining Hook
3. Remove the five attachment ...
License Plate Lamp
To replace one of these bulbs:
1. Open the liftgate partway. See Liftgate on page 2‑9.
Passenger Side Shown, Driver Side Similar
2. Push the left end of the lamp assembly toward the right.
...
See also:
Increasing fuel economy
GUID-08316153-E8EB-4B1D-A83C-780DAE9E7643
- Accelerate slowly and smoothly. Maintain
cruising speeds with a constant accelerator
position.
- Drive at moderate speeds on the highway.
Driving at ...
Running the Vehicle While Parked
It is better not to park with the engine running. But if you ever have to, here
are some things to know.
WARNING
Idling a vehicle in an enclosed area with poor ventilation is dangerous. Engine
e ...
Windshield wiper/washer switch
A : Wiper speed control:
· MIST – Single wipe.
· OFF – Off.
· INT – Intermittent wipe.
· LO – Low wiper speed.
· HI – High wiper speed.
B : Intermittent wipe time adjustme ...
