GMC Terrain: Automatic Transmission Shift Lock Control Function Check - Vehicle Checks - Vehicle Care - GMC Terrain Owner's ManualGMC Terrain: Automatic Transmission Shift Lock Control Function Check

GMC Terrain / GMC Terrain Owner's Manual / Vehicle Care / Vehicle Checks / Automatic Transmission Shift Lock Control Function Check

WARNING

When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured.

1. Before starting this check, be sure there is enough room around the vehicle. It should be parked on a level surface.

2. Firmly apply the parking brake. See Parking Brake on page 9‑33.

Be ready to apply the regular brake immediately if the vehicle begins to move.

3. With the engine off, turn the ignition on, but do not start the engine. Without applying the regular brake, try to move the shift lever out of P (Park) with normal effort. If the shift lever moves out of P (Park), contact your dealer for service.

    Starter Switch Check
    WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room aroun ...

    Ignition Transmission Lock Check
    While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. ○ The ignition should turn to LOCK/OFF only when the shift lever is in P (Park ...

    See also:

    Safety information
    Some tyre damage may only be partially sealed, or may not seal at all, depending on the amount and type of damage. Any loss of tyre pressure can seriously affect vehicle safety. Do not use the t ...

    Controls
    Outside air circulation: Push the air recirculation button to turn off the indicator light on the button. The air flow is drawn from outside the vehicle. Air recirculation: Push the air recircu ...

    Automatic Headlights — If Equipped
    This system automatically turns the headlights on or off according to ambient light levels. To turn the system on, turn the end of the multifunction lever to the AUTO position (third detent). Wh ...