Volvo XC60: Low beams - High/low beam headlights - Lighting - Your driving environment - Volvo XC60 Owner's ManualVolvo XC60: Low beams

When the engine is started, the low beams are activated automatically (daytime running lights) if the headlight control is in position 0 or Daytime running lights can be deactivated in.

Daytime running lights can be deactivated in the MY CAR menu system under Settings Car settings Car settings Light settings Light settings Daytime Daytime running lights.

However, please be aware that these lights may not be deactivated in Canada.

NOTE
• The use of daytime running lights is mandatory in Canada.
• Continuous high beams cannot be activated when the headlight switch is in position will. High beam flash will function in this position.

    High/low beam headlights
    Continuous high beams 1. Set the ignition to mode II. 2. With the light switch in position 0 or , pull the turn signal lever toward the steering wheel to position 2 to toggle between high an ...

    Active Bending Lights (ABL)
    Headlight pattern with the Active Bending Light function deactivated (left) and activated (right) When this function is activated, the headlight beams adjust laterally to help light up a curve ...

    See also:

    AM
    The range for most AM stations is greater than for FM, especially at night. The longer range can cause station frequencies to interfere with each other. Static can occur when things like storms an ...

    Cleaning the Video Screen
    Use only a clean cloth dampened with clean water. Use care when touching or cleaning the screen as damage could result. ...

    A/C – ON/OFF
    When the indicator light in the button is on, the air conditioning is controlled automatically. This cools/heats and dehumidifies the incoming air. When the indicator light in the button i ...