Volvo XC60: Active Bending Lights (ABL)
Headlight pattern with the Active Bending Light function deactivated (left)
and activated (right)
When this function is activated, the headlight beams adjust laterally to help light up a curve according to movements of the steering wheel (see the right-pointing beam in the illustration).
ABL is activated automatically when the engine is started.
The function can be deactivated/reactivated in the MY CAR menu system under My XC60 Active Bending Lights or under Settings Car settings Light settings Active Bending Lights.
See page 133 for a description of the menu system.
NOTE
This function is only active in twilight or dark
conditions, and only when the vehicle is in
motion.
If a fault should occur in the system, the symbol will illuminate and a message will be displayed as shown in the table.
Low beams
When the engine is started, the low beams are activated automatically (daytime running lights) if the headlight control is in position 0 or . Daytime running lights can be deactivated in the ...Parking lights
Headlight control in position for parking lights The parking lights (the license plate lights also come on) can be turned on even when the ignition is switched off. Turn the headlight control ...See also:
Important SRS precautions
The SRS is designed to work with
the safety belt to help protect the
driver and right front passenger
from certain upper body injuries.
Airbags DO NOT inflate slowly;
there is a risk of injury ...
Brake Pedal Travel
See your dealer if the brake pedal does not return to normal height, or if there
is a rapid increase in pedal travel. This could be a sign that brake service might
be required. ...
Tire change procedure
WARNING: When one of the front wheels is off the ground, the
transmission alone will not prevent the vehicle from moving or
slipping off the jack, even if the vehicle is in P (Park) (automatic
tra ...