Subaru Forester: License plate light - Replacing bulbs - Maintenance and service - Subaru Forester Owner's ManualSubaru Forester: License plate light

1. Remove the mounting screws using a

1. Remove the mounting screws using a Phillips screwdriver.

2. Remove the cover and lens.

3. Pull the bulb out of the socket.

4. Install a new bulb.

5. Reinstall the lens and cover.

6. Tighten the mounting screws.

    Rear combination lights
    1. Using a Phillips screwdriver, remove the upper and lower screws that secure the rear combination light assembly. 2. Slide the rear combination light assembly rearward and remove it from ...

    Dome light, map light, cargo area light and door step light
    When the door is opened, the map light illuminates and becomes very hot. When replacing the map light bulb, close the door and be careful not to burn yourself. Dome light (type A) Do ...

    See also:

    Operation Instructions — CD Mode For CD And MP3 Audio Play
    NOTE: • The ignition switch must be in the ON or ACC position to operate the radio. • This radio is capable of playing compact discs (CD), recordable compact discs (CD-R), rewritable compac ...

    Limited-Use Spare – If Equipped
    The limited-use spare tire is for temporary emergency use only. This tire is identified by a label located on the limited-use spare wheel. This label contains the driving limitations for this sp ...

    Starting and stopping the engine
    See page 112 for information on starting the engine and switching it off. ...