Subaru Forester: Rear combination lights
1. Using a Phillips screwdriver, remove the upper and lower screws that secure the rear combination light assembly.
2. Slide the rear combination light assembly rearward and remove it from the vehicle.
1) Brake/tail light
2) Rear turn signal light
3) Back-up light
3. Remove the bulb socket from the rear combination light assembly by turning it counterclockwise.
4. Pull the bulb out of the bulb socket and replace it with a new one.
5. Set the bulb socket into the rear combination light assembly and turn it clockwise until it locks.
6. Put the rear combination light assembly into place while aligning the clip with the guide on the vehicle.
7. Tighten the upper and lower screws.
Front turn signal light
It may be difficult to replace the bulbs.
Have the bulbs replaced by your SUBARU
dealer if necessary. ...
License plate light
1. Remove the mounting screws using a
Phillips screwdriver.
2. Remove the cover and lens.
3. Pull the bulb out of the socket.
4. Install a new bulb.
5. Reinstall the lens and cover.
6. Tighte ...
See also:
Memory point details
- Touch Info. to display the details of the
selected memory point.
The details include Icon, Name, Position and
Tel.
The telephone number can be called by
touching the telephone button if a telep ...
Operating Instructions — Voice Command System (If Equipped)
For the radio, Refer to “Voice Command” in the
Uconnect™ User Manual located on the DVD for further
details. ...
Making a phone call from speed dial
It is possible to select a phone number
from speed dial registered with the invehicle
equipment to make a phone call.
1. Select the top menu (phone menu).
2. Press the preset button (from
to
...
