Subaru Forester: Dome light, map light, cargo area light and door step light
When the door is opened, the map light illuminates and becomes very hot. When replacing the map light bulb, close the door and be careful not to burn yourself.
Dome light (type A)
Dome light (type B)
Map light
Cargo area light
Door step light
1. Remove the lens by prying the edge of the lens with a flat-head screwdriver.
2. Pull the bulb out of the socket.
3. Install a new bulb.
4. Reinstall the lens.
License plate light
1. Remove the mounting screws using a Phillips screwdriver. 2. Remove the cover and lens. 3. Pull the bulb out of the socket. 4. Install a new bulb. 5. Reinstall the lens and cover. 6. Tighte ...Other bulbs
It may be difficult to replace the bulbs. Have the bulbs replaced by your SUBARU dealer if necessary. ...See also:
Storing the current speed or calling up the last stored speed
WARNING
The set speed stored in memory should only be set again if prevailing road conditions
and legal speed limits permit. Possible acceleration or deceleration differences
arising from re ...
Conditions in which front passenger’s SRS frontal airbag is not activated
The front passenger’s SRS frontal airbag
will not be activated when any of the
following conditions are met regarding the
front passenger’s seat:
- The seat is empty.
- The seat is equipp ...
Registering speed dial
1. After registering phonebook data, select
the “SPEED DIAL” menu.
2. Press the preset button (from
to
) in which you want to register the phone number.
NOTE
If the number to be used i ...