Subaru Forester: High/low beam change (dimmer) - Light control switch - Keys and doors - Subaru Forester Owner's ManualSubaru Forester: High/low beam change (dimmer)

High/low beam change (dimmer)
High/low beam change (dimmer)

To change from low beam to high beam, push the turn signal lever forward. When the headlights are on high beam, the high beam indicator light “combination” on the combination meter is also on.

To switch back to low beam, pull the lever back to the detent position.

    Headlights
    Headlights To turn on the headlights, turn the knob on the end of the turn signal lever. first position Instrument panel illumination, tail lights, front side marker lights and license ...

    Headlight flasher
    Headlight flasher To flash the headlights, pull the lever toward you and then release it. The high beam will remain on for as long as you hold the lever. The headlight flasher works even ...

    See also:

    Deselecting valet mode
    If Valet mode is active when you enter the vehicle, touch the Valet button to view the Valet mode screen. Enter your four digit PIN and touch the OK button. Valet mode is deactivated is displayed ...

    Cruise control
    Use the cruise control to maintain a set speed without depressing the accelerator pedal. 1 Indicator 2 Cruise control switch ...

    Safety practices
    Driving habits have a great deal to do with your tire mileage and safety. • Observe posted speed limits • Avoid fast starts, stops and turns • Avoid potholes and objects on the road • Do ...