Range Rover Evoque: Deselecting valet mode

If Valet mode is active when you enter the vehicle, touch the Valet button to view the Valet mode screen.

Enter your four digit PIN and touch the OK button.

Valet mode is deactivated is displayed.

- The tailgate will return to the previously set security requirement.

- All touch screen functions are enabled.

See 14, SELECTING VALET MODE.

Note: If the PIN number is lost or forgotten, Valet mode can be deactivated only by your Dealer/Authorised Repairer.

READ NEXT:

 Operating the tailgate

Ensure there is minimum space of 1.0M (39 in) above the rear of vehicle before operating the tailgate. Insufficient space may result in damage to the vehicle. Do not operate the tailgate if

 Powered tailgate operation

1. Press to open the powered tailgate. 2. Press and release to close the powered tailgate. After the tailgate has opened to its set height, it can be manually raised or lowered. If the tailgate

 Powered tailgate opening height

The maximum opening height can be set as required. This is useful in parking areas with low ceiling heights or just for ease of use. 1. Open the tailgate to the position which you want to set as t

SEE MORE:

 Driving Modes

A number of different driving modes are available. Some can be selected by the driver and some are automatically initiated by the TCM to adapt to different driving conditions. Normal Sports Manual 'CommandShift' Cooling Hill Descent Control (HDC) Cruise Limp home Coast Fast off recognitio

 Component Description

Parking Aid Module The parking aid module is located on the LH side of the luggage compartment, behind the 'C' pillar trim panel. The parking aid module has three connectors which provide for power, ground and CAN bus connections, front parking aid sensors and rear parking aid sensors. The high

© 2011-2024 Copyright www.rrevoque.org