Subaru Forester: Headlight flasher
Headlight flasher
To flash the headlights, pull the lever toward you and then release it. The high beam will remain on for as long as you hold the lever. The headlight flasher works even though the light switch is in the “OFF” position.
When the headlights are on high beam,
the high beam indicator light “
” on
the
combination meter also illuminates.
Do not hold the lever in the flashing position for more than just a few seconds.
High/low beam change (dimmer)
High/low beam change (dimmer)
To change from low beam to high beam,
push the turn signal lever forward. When
the headlights are on high beam, the high
beam indicator light “” on the
c ...
Daytime running light system (if equipped)
The brightness of the illumination of
the high beam headlights is reduced
by the daytime running light system.
The light switch must always be
turned to the “” position
when it
is ...
See also:
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any elect ...
Key-Off Power Delay
When this feature is selected, the power window
switches, radio, hands–free system (if equipped), DVD
video system (if equipped), power sunroof (if equipped),
and power outlets will remain act ...
Before driving
Before entering vehicle: • Be sure that all windows, outside mirror(s), and outside
lights are clean. • Check the condition of the tires. • Check under the vehicle
for any sign of leaks. • ...
