Nissan Rogue: Continuously Variable Transmission (CVT)
The Continuously Variable Transmission (CVT) in your vehicle is electronically controlled to produce maximum power and smooth operation.
The recommended operating procedures for this transmission are shown on the following pages.
Follow these procedures for maximum vehicle performance and driving enjoyment.
Engine power may be automatically reduced to protect the CVT if the engine speed increases quickly when driving on slippery roads or while being tested on some dynamometers.
- Starting the vehicle
- Shifting
- SPORT mode switch
- Overdrive (O/D) OFF switch
- Accelerator downshift — In D position —
- High fluid temperature protection mode
- Fail-safe
- Shift lock release
Starting the vehicle
1. After starting the engine, fully depress the foot brake pedal before moving the selector lever out of the P (Park) position. This CVT is designed so that the foot brake pedal must be depress ...See also:
Air Conditioning
A/C (Air Conditioning): Press to turn the air conditioning on or off. If the
fan is turned off or the outside temperature falls below freezing, the air conditioning
will not work. When in AUTO, th ...
ABS warning light
Refer to “ABS warning light”. ...
Electrical circuit protection
Fuses A vehicle’s electrical system is protected from electrical overload damage
by fuses. This vehicle has two fuse panels, one located in the driver's side panel
bolster, the other in th ...