Jeep Liberty: Security
It is advised to erase all channels before you sell or turn in your vehicle.
To do this, press and hold the two outside buttons for 20 seconds until the red indicator flashes. Note that all channels will be erased. Individual channels cannot be erased.
The HomeLink Universal Transceiver is disabled when the Vehicle Security Alarm is active.
Using HomeLink
To operate, press and release the programmed
HomeLink button. Activation will now occur for the
programmed device (i.e., garage door opener, gate operator,
security system, entry door lock, home ...
Troubleshooting Tips
If you are having trouble programming HomeLink , here
are some of the most common solutions:
• Replace the battery in the original hand-held transmitter.
• Press the LEARN button on the Garage ...
See also:
Underinflated tires
WARNING
Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated
tires wear excessively and/or unevenly, adversely affect handling and fuel economy,
and are more ...
Outside rearview mirror
Manual Type
The outside rearview mirrors are equipped with
a remote control for your convenience. It is
operated by the control lever in the bottom front
corner of the window.
Before drivi ...
Rear Seats
The vehicle's rear seat has head restraints in the outboard seating positions
that cannot be adjusted. Rear outboard head restraints are not designed to be removed. ...
