Toyota RAV4: Selecting a language (English, French or Spanish)
1 Push and hold the “AUTO” button for 6 to 12 seconds. The screen will turn on and the indicator will turn green.
2 Push the “AUTO” button. Each time the “AUTO” button is pushed and released, the language changes. A message will flash in the mirror for 5 seconds after the button is released, indicating that the change has been completed.
Changing display modes
The rear view monitor display mode can be changed while the screen is on. ●To temporarily disable the rear view monitor system Push the “AUTO” button. The indicator will turn amber. Ve ...Displayed area
Vehicles without spare tire The area covered by the camera is limited. Objects that are close to either corner of the bumper or under the bumper cannot be seen on the screen. The area displayed ...See also:
Tire Pressures For High Speed Operation
The manufacturer advocates driving at safe speeds
within posted speed limits. Where speed limits or conditions
are such that the vehicle can be driven at high
speeds, maintaining correct tire in ...
Tires and wheels
Tires care For proper maintenance, safety, and maximum fuel economy, you must
always maintain recommended tire inflation pressures and stay within the load limits
and weight distribution recommend ...
When the System Does Not Seem to Work Properly
The following messages may be displayed on the DIC:
SERVICE PARKING ASSIST: If this message occurs, take the vehicle to your dealer
to repair the system.
PARK ASSIST OFF: If the URPA system does n ...