Jeep Liberty: Tire Pressures For High Speed Operation
The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and reduced vehicle loading may be required for high-speed vehicle operation.
Refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pressures.
WARNING!
High speed driving with your vehicle at or above
maximum load is dangerous. The added strain on
your tires could cause them to fail. You could have a
serious collision. Do not drive a vehicle loaded to the
maximum capacity at continuous speeds above
75 mph (120 km/h).
Tire Inflation Pressures
The proper cold tire inflation pressure is listed on the driver’s side “B” Pillar or rear edge of the driver’s side door. The pressure should be checked and adjusted, as well as inspect ...Radial-Ply Tires
WARNING! Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle poorly. The instability could cause a collision. Always use radial tires in sets ...See also:
Vehicle specifications
Detailed vehicle information. ...
Power seat (driver’s seat – if equipped)
1) Seat position forward/backward control
switch
To adjust the seat forward or backward,
move the control switch forward or
backward. During forward/backward adjustment of the seat, you canno ...
Introduction
Mercedes-Benz recommends that you use genuine Mercedes-Benz parts, conversion
parts and accessories that have been approved for the type of vehicle. Mercedes-Benz
tests genuine parts as well as co ...