Toyota RAV4: Changing display modes
The rear view monitor display mode can be changed while the screen is on.
●To temporarily disable the rear view monitor system
Push the “AUTO” button. The indicator will turn amber.
Vehicles without smart key system
The system will be re-enabled once the engine switch is turned OFF and then turned to the “ON” position.
Vehicles with smart key system
The system will be re-enabled once the “ENGINE START STOP” switch is turned OFF and then turned to IGNITION ON mode.
●To constantly disable the rear view monitor system
Push and hold the “AUTO” button for 12 to 15 seconds. The screen will turn off and on after 6 seconds. Keep pushing the button until the screen turns back off. The indicator will flash amber.
Vehicles without smart key system
The system will not automatically turn on again after the engine switch is OFF and then turned to the “ON” position.
Vehicles with smart key system
The system will not automatically turn on again after the “ENGINE START STOP” switch is OFF and then turned to IGNITION ON mode.
●To re-enable the rear view monitor system Push the “AUTO” button. The indicator will turn green.
The rear view monitor system can be operated when
Vehicles without smart key system The shift lever is in R, the back door is fully closed and the engine switch is in the “ON” position. Vehicles with smart key system The shift lever is in R ...Selecting a language (English, French or Spanish)
1 Push and hold the “AUTO” button for 6 to 12 seconds. The screen will turn on and the indicator will turn green. 2 Push the “AUTO” button. Each time the “AUTO” button is pushed an ...See also:
Warranty Information
See the Warranty Information Booklet, located on the
DVD, for the terms and provisions of Chrysler Group
LLC warranties applicable to this vehicle and market. ...
Selecting preset stations
1. Press the “FM/AM” button to select
FM1, FM2, FM3 (type A, B and C audio)/
FM-AS (type D audio), AM or AM-AS (type
D audio) reception.
2. Press the preferred preset button
(from
to
...
Calling up a stored parking position setting
Turn the SmartKey to position 2 in the ignition lock.
Adjust the exterior mirror on the frontpassenger side with the corresponding
button ().
Engage reverse gear. The exterior mirror on the ...