Volvo XC60: Extra high beam
1. Remove the headlight housing from the vehicle (see page 322).
2. Remove the cover over the bulbs (see page 323).
3. Disconnect the wiring connector from the bulb holder.
4. Remove the bulb holder from the headlight housing by pulling it straight out.
5. Insert a new bulb in the holder until it snaps in place. It can only be inserted in one way.
6. Press the bulb holder into position in the headlight housing.
7. Reconnect the wiring connector to the bulb holder.
8. Put the cover back into position and reinstall the headlight housing.
High beam, Halogen
1. Remove the headlight housing from the vehicle (see page 322). 2. Remove the cover over the bulbs (see page 323). 3. Remove the bulb by turning it counterclockwise and pulling it straight ...Turn signals
1. Remove the headlight housing from the vehicle (see page 322). 2. Remove the bulb holder by turning it counterclockwise and pulling it out of the headlight housing. 3. Pull out the holder ...See also:
Surround camera system
The camera home page is accessed from the
Home menu screen. If Cameras has not been
set as a short cut, touch Extra features to
display the list.
With the engine running, the surround camera
syst ...
Manual operation
The manual mode can be used to control the
heater and air conditioner to your desired
settings.
To turn off the heater and air conditioner, turn the
fan control dial to the OFF position.
Fan s ...
Accept vCards
vCards from other cell phones can be added to
the infotainment system's phone book. To enable
this feature, put the infotainment system in
discoverable mode for BluetoothВ®. The feature
is act ...