Volvo XC60: Turn signals
1. Remove the headlight housing from the vehicle (see page 322).
2. Remove the bulb holder by turning it counterclockwise and pulling it out of the headlight housing.
3. Pull out the holder to access the bulb.
4. Remove the burned out bulb by pressing it in slightly and turning it counterclockwise.
5. Press the new bulb into the holder and turn it clockwise.
6. Reinsert the bulb holder into the headlight housing and turn it clockwise.
7. Reinstall the headlight housing.
Extra high beam
1. Remove the headlight housing from the
vehicle (see page 322).
2. Remove the cover over the bulbs (see
page 323).
3. Disconnect the wiring connector from the
bulb holder.
4. Remove the bu ...
Side marker lights
NOTE
Before starting to replace a bulb, see
page 322.
1. Remove the headlight housing from the
vehicle (see page 322).
2. Remove the bulb holder by turning it counterclockwise
and pulling i ...
See also:
Inspection and Maintenance
...
Windshield wiper and washer switches
The wiper operates only when the ignition
switch is in the “ON” or “Acc” position. ...
Hill descent control (green)
Hill descent control (green)
Illuminates when HDC is selected
and HDC operating conditions are
met. If the lamp flashes, HDC has
been selected, but the operating conditions are
not being met (e ...
