Nissan Rogue: Manual operation
The manual mode can be used to control the heater and air conditioner to your desired settings.
To turn off the heater and air conditioner, turn the fan control dial to the OFF position.
Fan speed control:
Turn the fan speed control dial clockwise to increase the fan speed.
Turn the fan speed control dial counterclockwise to decrease the fan speed.
Turn the fan speed control dial to the AUTO position to change the fan speed to the automatic mode.
Air flow control:
Turn the air flow control dial to change the air flow mode.
: Air flows from the center and side ventilators.
: Air flows from the center and side ventilators and foot outlets.
: Air flows mainly from the foot outlets.
: Air flows from the defroster and foot outlets.
Temperature control:
Turn the temperature control dial to set the desired temperature.
Air recirculation:
Push the outside air circulation /air recirculation button to change the air circulation mode.
When the indicator below the air recirculation icon is illuminated, the flowing air is recirculated inside the vehicle.
Outside air circulation:
Push the outside air circulation /air recirculation button to change the air circulation mode.
When the indicator below the outside air circulation icon is illuminated, the flowing air is drawing from outside the vehicle.
Automatic air intake control:
Press the outside air circulation /air recirculation button once to change operation of the air conditioner in the following order.
Air recirculation mode Outside air circulation mode Automatic control mode Air recirculation mode
When automatic control mode is set, the air recirculation indicator and outside air circulation indicator will turn off.
Automatic operation (AUTO)
The AUTO mode may be used all year around as the system automatically controls constant temperature, air flow distribution and fan speed. To turn off the heater and air conditioner, turn the fa ...Servicing air conditioner
The air conditioner system contains refrigerant under high pressure. To avoid personal injury, any air conditioner service should be done only by an experienced technician with the prope ...See also:
Headlight aiming adjustment
Before performing aiming adjustment, make
sure of the following.
1. Keep all tires inflated to the correct pressure.
2. Place the vehicle on level ground and press
the front bumper & rear ...
Temperature A, B and C
The temperature grades A (the highest), B, and
C, representing the tire’s resistance to the
generation of heat and its ability to dissipate
heat when tested under controlled conditions on
a ...
Play file
NOTE
- Copyright protected MP3/WMA/AAC
files will not be played by the system.
The player will automatically skip to the
next file (track).
- WMA9 Lossless, WMA9 Professional
and WMA9 voice ...