Mercedes-Benz GLK-Class: Calling up a stored parking position setting - Parking position for the exterior mirror on the front-passenger side - Mirrors - Seats, steering wheel and mirrors - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Calling up a stored parking position setting

  • Turn the SmartKey to position 2 in the ignition lock.
  • Adjust the exterior mirror on the frontpassenger side with the corresponding button ().
  • Engage reverse gear. The exterior mirror on the front-passenger side moves to the stored parking position.

The exterior mirror on the front-passenger side moves back to its original position:

  • as soon as you exceed a speed of 6 mph (10 km/h)
  • about ten seconds after you have disengaged reverse gear
  • if you press button 1 for the exterior mirror on the driver's side
    Setting and storing the parking position
    You can position the front-passenger side exterior mirror in such a way that you can see the rear wheel on that side as soon as you engage reverse gear. You can store this position. Make sur ...

    See also:

    Storing and maintaining the current speed
    You can store the current speed if you are driving faster than 20 mph (30 km/h). Accelerate the vehicle to the desired speed. Briefly press the cruise control lever up 1 or down 2. Remove your ...

    General information
    Occupant Weight Sensor (OWS) indicator light ...

    Type B audio set (if equipped)
    Type B audio set (if equipped) The audio set will operate only when the ignition switch is in the “Acc” or “ON” position. - Power and audio controls: refer to page - Radio operation: ...