Subaru Forester: Service mode
In service mode, the remote start function is temporarily disabled to prevent the system from unexpectedly starting the engine while being serviced.
Pre-heating or pre-cooling the interior of the
vehicle
Before exiting the vehicle, set the temperature
controls to the desired setting
and operation. After the system starts the
vehicle, the heater or air-conditioning will
activate and heat or coo ...
To engage the service mode
Turn the ignition switch to the “ON”
position, depress and hold the brake
pedal, then press and release the “”
button on the remote control transmitter
three times. The system will pau ...
See also:
Tire inflation pressure
■ Tire inflation pressure
The recommended cold tire inflation pressure and tire size is displayed
on the tire and loading information label.
■ Inspection and adjustment procedure
1 ...
Panic alarm
To activate: press button
1 for at least one second.
An alarm sounds and the exterior lighting flashes.
To deactivate: press button
1 again.
or
Insert the SmartKey into the ign ...
Parking brake warning
The light illuminates with the parking
brake applied while the ignition switch is
in the “ON” position. It turns off when the
parking brake is fully released. ...
