Subaru Forester: To engage the service mode
Turn the ignition switch to the “ON”
position, depress and hold the brake
pedal, then press and release the “
”
button on the remote control transmitter
three times. The system will pause for 1
second and then flash the turn signal
lights and honk the horn three times
indicating that the system is in service
mode. When attempting to activate the
remote start system while in service
mode, the turn signal lights will flash and
the horn will honk two times and will not
start.
Service mode
In service mode, the remote start function
is temporarily disabled to prevent the
system from unexpectedly starting the
engine while being serviced. ...
To disengage the service mode
Turn the ignition switch to the “ON”
position, depress and hold the brake
pedal, then press and release the “”
button on the remote control transmitter
three times. The system will p ...
See also:
Cruise Control (if equipped)
Cruise Control
(if equipped)
The cruise control system allows you to maintain a steady speed without keeping
your foot on the accelerator pedal. The controls for operating the cruise control
s ...
Installing carrying attachments on the crossbars
When installing any carrying attachment
such as a bike carrier, ski carrier, kayak
carrier, cargo basket, etc. on the crossbars,
follow the manufacturer’s instructions
and make sure that the ...
Introduction
When the automatic transmission is in position D, it is possible to restrict
or derestrict the shift range (). The shift range selected is shown in
the multifunction display. The automatic transmi ...
