Mercedes-Benz GLK-Class: Panic alarm
- To activate: press button
1 for at least one second.
An alarm sounds and the exterior lighting flashes. - To deactivate: press button 1 again.
or
- Insert the SmartKey into the ignition lock.
or
- Press the KEYLESS-GO Start/Stop button. The KEYLESS-GO key must be in the vehicle.
USA only:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
Any unauthorized modification to this device could void the user's authority to operate the equipment.
The product label with FCC ID and IC certification number can be found in the battery case of the SmartKey.
Canada only:
This device complies with RSS-Gen of Industry Canada. Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
Any unauthorized modification to this device could void the user's authority to operate the equipment.
The product label with FCC ID and IC certification number can be found in the battery case of the SmartKey.
Override feature for the rear side windows
WARNING When children ride on the vehicle's rear seats, activate the override switch. Otherwise, the children could be injured, e.g. by trapping themselves in the rear side window. ...See also:
Conditions affecting operation
Vehicles without smart key system
The wireless remote control function may not operate normally in the
following
situations.
●Near a TV tower, radio station, electric power plant, airport o ...
Power steering fluid
To check the fluid level
Check the fluid level in the reservoir while the engine is idling. Check to make
certain that the power steering fluid level is always between the “MAX” and “MIN” ...
Before programming
When programming a device
that may
require you to press and re-press the
hand-held transmitter (cycle), unplug
the device during the cycling process to
prevent possible motor failure.
For best ...