Volvo XC60: Low beams
When the engine is started, the low beams are activated automatically (daytime running lights) if the headlight control is in position 0 or .
Daytime running lights can be deactivated in the MY CAR menu system under Settings Car settings Light settings Daytime running lights.
However, please be aware that these lights may not be deactivated in Canada.
NOTE
• The use of daytime running lights is
mandatory in Canada.
• Continuous high beams cannot be activated
when the headlight switch is in
position . High beam flash
will
function in this position.
High/low beam headlights
Continuous high beams 1. Set the ignition to mode II. 2. With the light switch in position 0 or , pull the turn signal lever toward the steering wheel to position 2 to toggle between high an ...Active Bending Lights (ABL)
Headlight pattern with the Active Bending Light function deactivated (left) and activated (right) When this function is activated, the headlight beams adjust laterally to help light up a curve ...See also:
Programming A Rolling Code
For programming garage door openers that were manufactured
after 1995. These garage door openers can be
identified by the “LEARN” or “TRAIN” button located
where the hanging antenna is a ...
Disc brake pad wear warning indicators
Disc brake pad wear warning indicators
The disc brake pad wear warning indicators
on the disc brakes give a warning
noise when the brake pads are worn.
If a squeaking or scraping noise is he ...
Storage spaces
CAUTION:
● Never leave lighters, canned carbonated beverage, and spectacles in the cabin
when parking the vehicle in hot sunshine. The cabin will become extremely hot, so
lighters and othe ...