Volvo XC60: High/low beam headlights
Continuous high beams
1. Set the ignition to mode II.
2. With the light switch in position 0 or , pull the turn signal lever toward the steering wheel to position 2 to toggle between high and low beams (this also applies on models equipped with the optional Active Bending Lights).
> The symbol illuminates in the instrument panel to indicate that the high beams are on.
High beam flash
Move the lever toward the steering wheel to position 1. The high beams come on until the lever is released. ...Low beams
When the engine is started, the low beams are activated automatically (daytime running lights) if the headlight control is in position 0 or . Daytime running lights can be deactivated in the ...See also:
Storing settings
With the memory function, you can store up to three different settings, e.g.
for three different people.
The following settings are stored as a single memory preset:
position of the seat, backr ...
Precautions when the vehicle is being towed
• Attach jumper cables (see page 114) to
provide current for releasing the electric
parking brake and to move the gear selector
from the P position to N.
• Be sure that the steering wheel l ...
Selecting preset channels
1. Press the “SAT” button to select SAT1,
SAT2 or SAT3 reception.
2. Press the preferred preset button
briefly. ...