Volvo XC60: Active Bending Lights (ABL)
Headlight pattern with the Active Bending Light function deactivated (left)
and activated (right)
When this function is activated, the headlight beams adjust laterally to help light up a curve according to movements of the steering wheel (see the right-pointing beam in the illustration).
ABL is activated automatically when the engine is started.
The function can be deactivated/reactivated in the MY CAR menu system under My XC60 Active Bending Lights or under Settings Car settings Light settings Active Bending Lights.
See page 133 for a description of the menu system.
NOTE
This function is only active in twilight or dark
conditions, and only when the vehicle is in
motion.
If a fault should occur in the system, the symbol will illuminate and a message will be displayed as shown in the table.
Low beams
When the engine is started, the low beams are activated automatically (daytime running lights) if the headlight control is in position 0 or . Daytime running lights can be deactivated in the ...Parking lights
Headlight control in position for parking lights The parking lights (the license plate lights also come on) can be turned on even when the ignition is switched off. Turn the headlight control ...See also:
Important SRS precautions
The SRS is designed to work with
the safety belt to help protect the
driver and right front passenger
from certain upper body injuries.
Airbags DO NOT inflate slowly;
there is a risk of injury ...
ETS/4ETS (Electronic Traction System)
WARNING
Observe "Important safety notes" ().
Traction control is part of ESPВ®.
Traction control brakes the drive wheels individually if they spin. This enables
you to pull away an ...
Steering wheel
Power steering Power Steering uses energy from the engine to assist you in steering
the vehicle. If the engine is off or if the power steering system becomes inoperative,
the vehicle may still be ...