Subaru Forester: To decrease the speed (by button)
To decrease the speed (by button)
Push the “SET/COAST” button and hold it until the vehicle reaches the desired speed. Then, release the button. The vehicle speed at that moment will be memorized and treated as the new set speed.
When the difference between the actual vehicle speed and the set speed is less than 4 mph (6.8 km/h), the set speed can be lowered 1 mph (1.6 km/h) each time by pressing the “SET/COAST” button quickly.
To increase the speed (by accelerator pedal)
1. Depress the accelerator pedal to accelerate the vehicle to the desired speed. 2. Push the “SET/COAST” button once. Now the desired speed is set and the vehicle will keep running at that ...To decrease the speed (by brake pedal)
1. Depress the brake pedal to release cruise control temporarily. 2. When the speed decreases to the desired speed, press the “SET/COAST” button once. Now the desired speed is set and the ...See also:
If the vehicle breaks down
If the vehicle breaks down on the road, move it to the shoulder and use the hazard
warning flashers. Refer to “Hazard warning flasher switch” on page 3-64.
If the engine stops/fails
Vehicle op ...
Engaging the cruise control function
Before a speed can be set, the cruise control
system must be engaged (put in standby
mode).
Press the symbol (1).
> The symbol illuminates and the
text
(---) mph (5) indicates that crui ...
Brake Master Cylinder
The fluid in the master cylinder should be checked when
performing under hood services or immediately if the
“Brake Warning Light” is illuminated.
Be sure to clean the top of the master cylin ...