Volvo XC60: Engaging the cruise control function
Before a speed can be set, the cruise control system must be engaged (put in standby mode).
Press the symbol (1).
> The symbol illuminates and the text (---) mph (5) indicates that cruise control is in standby mode.
NOTE
• Putting cruise control in standby mode
does not set a cruising speed.
• When cruise control is in standby mode,
the driver's seat belt must be fastened
before a cruising speed can be set.
Operation
Steering wheel-mounted controls and display 1 Standby mode 2 Resume set speed 3 Deactivating 4 Activate/set speed 5 Set speed indicator (parentheses indicate standby mode) ...Setting a speed
Use the or buttons set the vehicle's current speed. The set speed is shown in the display. NOTE Cruise control cannot be engaged at speeds below 20 mph (30 km/h). ...See also:
Installing a Child Seat with a Lap/Shoulder Belt
When not using the LATCH system,
all child seats must be secured to the
vehicle with the lap part of a lap/
shoulder belt.
In addition, the lap/shoulder belts in
all seating positions except ...
Outside rearview mirror
Manual Type
The outside rearview mirrors are equipped with
a remote control for your convenience. It is
operated by the control lever in the bottom front
corner of the window.
Before drivi ...
If No Steam is Coming from the Engine Compartment
If an engine overheat warning is displayed but no steam can be seen or heard,
the problem may not be too serious. Sometimes the engine can get a little too hot
when the vehicle:
○ Climbs a ...