Subaru Forester: To increase the speed (by accelerator pedal) - To change the cruising speed - Cruise control - Starting and operating - Subaru Forester Owner's ManualSubaru Forester: To increase the speed (by accelerator pedal)

1. Depress the accelerator pedal to accelerate the vehicle to the desired speed.

2. Push the “SET/COAST” button once.

Now the desired speed is set and the vehicle will keep running at that speed without depressing the accelerator pedal.

NOTE
If the difference between the actual vehicle speed when the button is pushed and the speed last time you set is less than 4 mph (6.8 km/h), the vehicle speed will be lowered by 1 mph (1.6 km/h). This occurs because the cruise control system unit regards this operation as that intended to decrease the vehicle speed.

    To increase the speed (by button)
    To increase the speed (by button) Push the “RES/ACC” button and hold it until the vehicle reaches the desired speed. Then, release the button. The vehicle speed at that moment will be ...

    To decrease the speed (by button)
    To decrease the speed (by button) Push the “SET/COAST” button and hold it until the vehicle reaches the desired speed. Then, release the button. The vehicle speed at that moment will be ...

    See also:

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific diffe ...

    Memory Features
    On vehicles with the memory feature, the “1” and “2” buttons on the outboard side of the driver seat are used to manually save and recall the driver seat and outside mirror positions. Th ...

    Listing the registered cellular phones
    Select “List Phone” using . The list of registered cellular phones will be displayed. ● Connecting the registered cellular phone to the audio system 1 Select the name of the cellular ...