Volvo XC60: Removing the cover to access the bulbs
NOTE
Before starting to replace a bulb, see
page 322.
1. Open the retaining clamps by pressing them to the sides.
2. Pull the cover straight out.
Reinstall the cover in the reverse order.
Reinserting the headlight housing
When reinserting the housing, be sure that the long locking pin (to the left in the illustration) is securely in place in both of its retaining clamps. 1. Plug in the connector until it clicks ...Low beam, Halogen
1. Remove the headlight housing from the vehicle (see page 322). 2. Remove the cover over the bulbs (see page 323). 3. Unplug the connector from the bulb. 4. Remove the bulb by pressing the h ...See also:
To Play an iPod
This audio system can select and
play the audio files on the iPod with
the same controls used for the indash
disc player. To play an iPod,
connect it to the USB adapter cable
in the upper gl ...
California perchlorate advisory
Some vehicle parts, such as lithium batteries,
may contain perchlorate material.
The following advisory is provided: “Perchlorate
Material - special handling may
apply, See www.dtsc.ca.gov/
...
Brake Support
If the risk of collision continues to increase after
the collision warning has been given, Brake
Support is activated. Brake Support prepares
the brake system to react quickly, and the
brakes ...