Volvo XC60: Low beam, Halogen - Replacing bulbs - Maintenance and specifications - Volvo XC60 Owner's ManualVolvo XC60: Low beam, Halogen

1. Remove the headlight housing from the

1. Remove the headlight housing from the vehicle (see page 322).

2. Remove the cover over the bulbs (see page 323).

3. Unplug the connector from the bulb.

4. Remove the bulb by pressing the holder downward.

5. Press the new bulb into the socket until it snaps into place. It can only be secured in one position.

6. Put the cover back into position and reinstall the headlight housing.

    Removing the cover to access the bulbs
    NOTE Before starting to replace a bulb, see page 322. 1. Open the retaining clamps by pressing them to the sides. 2. Pull the cover straight out. Reinstall the cover in the reverse order. ...

    High beam, Halogen
    1. Remove the headlight housing from the vehicle (see page 322). 2. Remove the cover over the bulbs (see page 323). 3. Remove the bulb by turning it counterclockwise and pulling it straight ...

    See also:

    Limitations
    Even if a fairly small section of the screen image appears to be obstructed, this may mean that a relatively large area behind the vehicle is hidden and objects there may not be detected until ...

    Pairing and connecting an external device
    Before an external device can be connected, it must be paired to the infotainment system. The procedure for connecting an external device varies, depending whether or not the device has previo ...

    Heating and cooling control
    1. Side Defroster Nozzle 2. Side Ventilators 3. Windshield Defroster Nozzles 4. Center Ventilators CENTER VENTILATOR The center ventilators are located in the middle of the dashboard. To ...