Range Rover Evoque: Memory seats
Front seat positions can be saved to vehicle memory.
Once you have adjusted the power operated driver’s seat and the exterior mirrors, the vehicle can memorise the settings for future use. See 48, EXTERIOR MIRRORS.
1. On the driver’s seat, press the memory store button to activate the memory function. The switch indicator will illuminate.
2. Press one of the preset buttons within 5 seconds to memorise the current settings.
Memory (1, 2 or 3) Settings Saved will be displayed on the message centre, accompanied by an audible chime to confirm the settings have been saved to memory.
Note: A seat position will be saved to memory only during the 5 second active period.
Note: Any existing settings will be over-written when a new position is saved to memory.
To recall a saved position, press the relevant preset button (2). Memory (1, 2 or 3) Recalled will be displayed in the message centre.
For the passenger seat of a Coupe model, press the memory button to store the current settings. If the seat adjustment is subsequently changed, press the memory button to restore the original settings.
READ NEXT:
Easy entry/exit
When Easy entry/exit is configured, the driver’s
seat will automatically lower when the ignition
is switched off and the door release lever is
used. Upon returning to the vehicle, when the
drive
Head restraints
Adjust the head restraint so
that the
top of the head restraint is above the
centre line of the head. An incorrectly
adjusted head restraint increases the
risk of death or serious injury in the
Integrated head restraints
Models with ‘sports’ seats have non adjustable
and non removable head restraints.
SEE MORE:
Steering Linkage
Tie Rod End
Special Tool(s)
205-754A
Splitter, Ball Joints
Removal
NOTE: RH illustration shown, LH is similar.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and
Installation).
3.
4. CAUTIO
Smart key check
If the ignition is on or the engine is running and
there is no Smart Key inside the vehicle when
the last door is closed, the message Smart Key
Not Found Refer to Handbook will be displayed
in the message centre.
Ensure that the Smart Key is in the
vehicle before it is driven to another
loca
