Volvo XC60: License plate lighting
1. Remove the screws with a screwdriver.
2. Carefully detach the entire bulb housing and pull it out.
3. Replace the bulb.
4. Reinsert the entire bulb housing and tighten the screws.
Brake lights and taillights
The brake lights and taillights are replaced from inside the cargo area. NOTE Before starting to replace a bulb, see page 322. 1. Open the panel. 2. Remove the bulb holder by turning it coun ...Cargo area lighting
NOTE Before starting to replace a bulb, see page 322. 1. Insert a screwdriver and gently turn so that the bulb housing comes loose. 2. Replace the bulb. 3. Check that the bulb illuminates an ...See also:
Kick-down
Push the accelerator pedal fully down to
achieve rapid acceleration in automatic mode.
When the pedal is relaxed, normal gear
changing will resume. ...
Driving with summer tires
Observe the notes in the "Winter operation" section (). ...
Important safety notes
WARNING
On slippery road surfaces, never downshift in order to obtain braking action.
This could result in drive wheel slip and reduced vehicle control. Your vehicle's
ABS will not preve ...