Volvo XC60: Cargo area lighting
NOTE
Before starting to replace a bulb, see
page 322.
1. Insert a screwdriver and gently turn so that the bulb housing comes loose.
2. Replace the bulb.
3. Check that the bulb illuminates and press it back into the bulb housing.
License plate lighting
1. Remove the screws with a screwdriver. 2. Carefully detach the entire bulb housing and pull it out. 3. Replace the bulb. 4. Reinsert the entire bulb housing and tighten the screws. ...Vanity mirror lighting
Removing the mirror glass 1. Insert a screwdriver underneath the lower edge, in the center, turn and carefully pry up the lug on the edge. 2. Carefully detach and lift out the entire mirror ...See also:
Folding down the cargo area cover's rear flap
The cargo area cover's rear flap points horizontally
when the cover is retracted (rolled up).
To fold it down:
- Pull the flap slightly rearward past its supports
and fold it down.
NOTE
On mod ...
Optional Separation Net
The separation net can be used to
hold back soft, lightweight items
stored in the cargo area. Heavy
items should be properly secured on
the floor of the cargo area. The net
may not prevent h ...
General notes
Read this section carefully before driving your vehicle off-road. Practice by
driving over more gentle off-road terrain first.
Familiarize yourself with the characteristics of your vehicle and the ...